AMS84-USB

AMS84-USB

€ 1,699.00

Quantity:

All-In-One Measurement System. 19 Inches. DAQ via USB.

The AMS84-USB, a complete solution: amplifier technology and data acquisition. A high-quality USB data acquisition system is already integrated. Available as a stationary version for installation in 19" rack systems.

Modular Concept. Equip Individually. Be Flexible.

The AMS device is equipped with cassettes, on which the required 5B measuring amplifiers are mounted. The variety of available 5B modules allows for the optimum adaptation of the AMS84-USB to any special measuring task.

Choose Connector. Mount 5B Amplifier. Done.

The available plug-in cassettes have different connectors on the front panel. Depending on the sensor or signal to be connected, the suitable cassette can be chosen. Now the 5B module only has to be fixed on the cassette and be integrated in the AMS system.

Clearly Safe.

The galvanic isolation provided by the 5B modules guarantees interference-free operation and protects the DAQ system and the PC against high potentials.

Analog. 16 Inputs. 2 Outputs.

Signals are connected at 16 amplifier inputs with 16 bit resolution and 250kHz total sampling rate. The two ±10V outputs can be used for analog controls with 16 bit accuracy.

Digital. 4 Inputs. 4 Outputs. 1 Counter.

Digital states are recorded or set at four digital inputs and outputs each. For pulse measurements, an additional isolated counter input is provided.

Plug & Play with USB

The connection to the PC is realized via USB. The AMS84-USB provides all typical USB features (e.g. Plug & Play, Hot-Plug).

Optimal for Windows.

The drivers and programming interface is optimized for 64Bit under Windows® 10/11. All software for installation and programming of the AMS84-USB is included free of charge.

NextView. Try for Free.

The DAQ system is supported by NextView, the software for data acquisition and analysis. A fully functional 14-day trial can be requested under www.nextview.de. So it is possible, to directly test the functionality of the device.

Versions and Options. Something for Everybody.

Other AMS versions, such as a ½ x 19-inch table-top unit, with an integrated LAN data acquisition system, or as an amplifier system without a DAQ unit are available. With the add-on option AMS-DIG4, four opto-isolated digital inputs and relay outputs each are provided.

The most important functions in a nutshell. For technical details see the relating data sheet (PDF).

5B compatible
19" 3U aluminum housing (84HP)
16 analog inputs
16 bit, max. 250kHz, isolated
2 analog outputs (16 bit, ±10V)
4 digital inputs and outputs each (TTL/CMOS)
1 counter (16 bit, isolated)
9-40V power supply
individual plug-in cassettes installable per channel

Hardware and Software from One Hand

Drivers and programming support are naturally included with all DAQ systems for free and can be downloaded from this website.

bmcm Driver Package

USB/PCI/PCIe data acquisition hardware always requires the installation of a device driver to be accessible by software. By providing a free bmcm driver package, the device installation has to be done only once - additional DAQ hardware is installed automatically.

Simply NextView

For all who want to start right away: View and store signals, configure the measurement system, process measuring data and much more.
Test all features of the data acquisition software 14 days for free! As a premium member of bmcm you can test all functionalitys of NextView for 30 days.
Next...

Simply LIBAD

Programming leanly and quickly: Use bmcm data acquisition systems in your own programs. The hardware independent programming interface (API) LIBAD4 is available as DLL in 64 Bit (Windows 10/11).
Next...

Datenblatt - 16-channel Amplifier Measurement System for 5B modules (USB) (v. 4.2)
Übersicht - Compatibility table (v. 01.15)

BMCM - Drivers for Windows 10 / 11

Software - Driver package for bmcm data acquisition hardware (v. 5.1.606)

You are looking for drivers for older windows versions? You can find them in the download archive.

NextView - Measurement Software

Handbuch - User manual for NextView® 5 (v. 5.0)
Software - Installation of NextView® 5.2 (Pro, Lite, Analysis, Trial) (64bit) (v. 5.2.645)

LIBAD - Programming Interface (API)

Handbuch - Library for programming interface LIBAD4 (v. 5.0)
Software - Programming interface LIBAD4 API für Windows® (v. 5.0.584)

Go back